FlexTherm wall dividers are a barrier for temperature control in coolers and freezers. FlexTherm walls are the perfect solution when you want to have the ability to change the sizes of your rooms quickly, easily and with low cost. They will also prevent condensation build-up on the warm side of your barrier wall.

QUALITY
All edges are folded under - this reduces moisture build-up
Webbing is sewn at the top to add strength
Sewing is double stitched with moisture resistant thread
Two layers of reinforced coated PVC flame retardant material are used as the outer layer
Repairs are easy with patch kit if fabric is torn
Cleaning is simple using a mild detergent and water
If you need to cut around the roof joist, we sew a rip-stop seam 3' from the top to prevent a gap from opening
   (optional)

EASY INSTALLATION
Attach to angle iron either at the roof deck or under the joist

FLEXIBILITY
Panels may be moved to reconfigure your room to meet seasonal needs
You may add or subtract panels as needed
It is lightweight to make moving the panels that much easier

ECONOMY
Initial installation is easy and quick - which saves money on labor
If the cooler/freezer space needs to be reconfigured it is easy to move, add or subtract the panels

PRODUCT INFORMATION

Panels are 5' to 6' wide with two outer layers of reinforced vinyl. Between the outer layers is a combination of foil and bubble to reflect and isolate the temperatures. Hook and loop fasteners on the side edges seal the panels together to create a solid wall. The bottom edge is folded over and stitched to seal against moisture. A 4" strip of loop is added to the bottom - this allows a floor sweep material with a hook strip to be attached and adjusted to seal at the floor.

5' - 6' wide sections
hook and loop fasteners on side edges
#4 grommets at top
lightweight panels
outer layers are made of reinforced vinyl material
easy to clean and patch
installation quick and easy
adjustable floor sweep at bottom